PnP 2512
6332 metric · 6.3 × 3.20 mm
Package drawing
Top view, to scale, drawn by the same engine the app uses. Letters match the datasheet. In the app you can flip to the bottom view, which is how most datasheets draw it.
Numbers to program
| Length L | 6.3 mm |
|---|---|
| Width W | 3.2 mm |
| Height (A) | 0.55 mm |
| Terminal t | 0.6 mm |
| Tape | 12 mm wide / 4 mm pitch |
| Parts per reel (typical) | 4,000 |
Common current-sense resistor size.
Typical industry values for this package. Always confirm against the datasheet for the exact part number and suffix you are placing, and check the first board.
What to watch on Chips
- Imperial 0603 confused with metric 0603 (an 0201)
- Tall capacitors programmed at resistor height
- Ordering cut tape with no leader
Read the full guide: Chip resistors and capacitors (0201 to 2512).
Program it on your machine
PnP Toolkit sets its words and setup sheet for your machine. Pick yours for the step-by-step:
Tools that use this part
FeatureKitting list from the BOMPaste a BOM from Excel and get one line per reel: quantity to pull with spares, tape width, MSL level, package, and the…FeatureUnit converters and size codesMillimeters, mils, inches and microns side by side; paste a min/nom/max row and get the nominal; a common pitch table;…FeatureTape, feeders and orderingHow many parts to order with spares, which DigiKey packaging code loads straight into a feeder (TR, DKR, CT), and how…
More Chips
Try PnP Toolkit free for 30 days
No credit card. Works on any phone or line PC. After the trial it’s $49/month per machine.