PnP Toolkit Start free trial
Part category

Crystals and oscillators

Small ceramic packages with 2 or 4 pads. Pin 1 position and marking vary between makers, so the drawing for the exact part number matters.

Browse them in the appSee all 10 part numbers

The numbers you program

Mistakes to watch

Each of these has a check in PnP Toolkit. See the test results on the proof page.

Part numbers in the library (10)

Part numberMakerPackageSizeMSLDatasheet
Crystal 3225Generic4-pad crystal / oscillator3.20 × 2.50 mm body––
Crystal 2520Generic4-pad crystal / oscillator2.50 × 2.00 mm body––
Crystal 2016Generic4-pad crystal / oscillator2.00 × 1.60 mm body––
Crystal 1612Generic4-pad crystal / oscillator1.60 × 1.20 mm body––
32.768 kHz 3215Generic2-pad watch crystal3.2 × 1.50 mm––
ABM8Abracon3.2 × 2.5, 4 pad3.20 × 2.50 mm body–PDF
ABM8GAbracon3.2 × 2.5, 4 pad3.20 × 2.50 mm body–PDF
ABM10Abracon2.5 × 2.0, 4 pad2.50 × 2.00 mm body–PDF
ABM11Abracon2.0 × 1.6, 4 pad2.00 × 1.60 mm body–PDF
ABS07-32.768KHZAbracon3215, 2 pad3.2 × 1.50 mm–PDF

Missing a part? Decode it from the datasheet in the app and save it to My Parts; it goes to the whole team with the team file.

Tools for Crystals

FeatureParts libraryA built-in library of 179 packages and real part numbers, each with body and lead sizes, tape, MSL level and, for 104…FeatureRotation helperWorks out the turn angle when pin 1 on the tape is not where the CAD data expects it, and adds it to the placement…FeatureLoad checkScan or type each reel before it goes in a feeder. The answer is instant: on this job with its slot, close but not the…

Machine guides

How to set up and program these parts on your machine:

Other part categories

Try PnP Toolkit free for 30 days

No credit card. Works on any phone or line PC. After the trial it’s $49/month per machine.