PnP Toolkit for Mycronic: setup, terms and part programming

Mycronic’s MY300 and MYPro series are high-mix placement machines with Agilis feeders and a large range of tools. PnP Toolkit is an independent operator app: pick Mycronic once and it uses Mycronic words for tools and Agilis feeders, keeps a setup sheet for your Mycronic machine, and points you to TPSys / MYCenter for the program.

What changes when you pick Mycronic

Your model not listed? Type it in the picker. The terms above apply to all Mycronic models.

Set it up in four steps

1. Open the app on the phone or line PC at pnptoolkit.app. It opens with Mycronic selected; pick your model.
2. Fill in the machine setup sheet: the tool and Agilis feeder you use for each package. Scan your existing setup sheet to save typing.
3. Share the team file so every operator on this Mycronic has the same choices (how).
4. Add it to the home screen so it opens like any other app, and works offline.

Programming a new part on Mycronic

1. Find the part in the library, or scan its label or product page.
2. If it is new, type the drawing numbers into the QFN decoder. Check the warnings and the to-scale drawing.
3. Type the nominal numbers into TPSys / MYCenter. Use the rotation helper if pin 1 on the tape doesn’t match the CAD.
4. Before the run, build the kitting list and load-check every reel into its Agilis feeder.

Part categories and part numbers for Mycronic

All 179 library entries work the same on every machine. Tape widths below tell you which Agilis feeder sizes to have ready.

Mycronic Agilis feeders, tools and settings

The names below are what PnP Toolkit offers in the setup sheet pick lists when you pick Mycronic. Each one links to the maker document (or, where marked, the supplier catalog) it came from. Models and options vary, so always match the name printed on your own tool or Agilis feeder. Compare the same thing across brands in pick-and-place terms across brands.

Agilis feeders, trays and sticks

Tools

Heads

Centering and vision

Placement settings: the maker’s own words

In the app, ⚙ on each setup row holds centering, head, speed, pick and place height offsets, placement force and vacuum check. These are the terms Mycronic uses for those ideas:

Software

Tools operators use on Mycronic

Other machines

• ASM SIPLACE
• FUJI
• Yamaha
• Panasonic
• Juki
• Europlacer
• Hanwha
• Universal Instruments
• Other / desktop

Mycronic and model names are trademarks of their owners. PnP Toolkit is independent and not affiliated with or endorsed by Mycronic.