PnP ABM8
Abracon Crystal 3225 · 3.2 × 2.5, 4 pad · 3.20 × 2.50 mm body
Package drawing
• Pad 1 position varies by maker: check the dot or chamfer
Top view, to scale, drawn by the same engine the app uses. Letters match the datasheet. In the app you can flip to the bottom view, which is how most datasheets draw it.
Numbers to program
| Body D | 3.2 mm |
|---|---|
| Body E | 2.5 mm |
| Height (A) | 0.8 mm |
| Tape | 8 mm wide / 4 mm pitch |
Values come from the linked datasheet. Always confirm against the datasheet for the exact part number and suffix you are placing, and check the first board.
What to watch on Crystals
- Pin 1 taken from another maker’s drawing
- 2-pad and 4-pad versions of the same frequency mixed up
Read the full guide: Crystals and oscillators.
Program it on your machine
PnP Toolkit sets its words and setup sheet for your machine. Pick yours for the step-by-step:
Tools that use this part
FeatureParts libraryA built-in library of 179 packages and real part numbers, each with body and lead sizes, tape, MSL level and, for 104…FeatureRotation helperWorks out the turn angle when pin 1 on the tape is not where the CAD data expects it, and adds it to the placement…FeatureLoad checkScan or type each reel before it goes in a feeder. The answer is instant: on this job with its slot, close but not the…
More Crystals
Try PnP Toolkit free for 30 days
No credit card. Works on any phone or line PC. After the trial it’s $49/month per machine.