PnP SMA
DO-214AC · 4.3 × 2.6 body · 5.2 overall
Package drawing
Top view, to scale, drawn by the same engine the app uses. Letters match the datasheet. In the app you can flip to the bottom view, which is how most datasheets draw it.
Numbers to program
| Length L | 4.3 mm |
|---|---|
| Width W | 2.6 mm |
| Height (A) | 2.3 mm |
| Lead width | 1.4 mm |
| Overall span | 5.2 mm |
| Tape | 12 mm wide / 4 mm pitch |
Cathode band on top.
Typical industry values for this package. Always confirm against the datasheet for the exact part number and suffix you are placing, and check the first board.
What to watch on Diodes
- Cathode band reversed
- SOD-123 and SOD-123F mixed up
- SMA vs SMB body picked from memory
Read the full guide: Diodes: SOD, SMA, SMB and SMC.
Program it on your machine
PnP Toolkit sets its words and setup sheet for your machine. Pick yours for the step-by-step:
Tools that use this part
FeatureParts libraryA built-in library of 179 packages and real part numbers, each with body and lead sizes, tape, MSL level and, for 104…FeatureRotation helperWorks out the turn angle when pin 1 on the tape is not where the CAD data expects it, and adds it to the placement…FeatureJob setup checklistTen checks to tap through before every new job or changeover: program revision, board support, feeder list, imperial vs…
More Diodes
Try PnP Toolkit free for 30 days
No credit card. Works on any phone or line PC. After the trial it’s $49/month per machine.