PnP ACM2012-900-2P
TDK Common-mode choke · 2012 (0805), 4 terminals · 2.00 × 1.20 mm body
Package drawing
• Pad 1 position varies by maker: check the dot or chamfer
Top view, to scale, drawn by the same engine the app uses. Letters match the datasheet. In the app you can flip to the bottom view, which is how most datasheets draw it.
Numbers to program
| Body D | 1.8 – 2.2 (nom 2) mm |
|---|---|
| Body E | 1 – 1.4 (nom 1.2) mm |
| Height (A) | 1.1 – 1.3 (nom 1.2) mm |
| Tape | 8 mm embossed, 2000 pcs |
4 terminals: orientation matters. Check the pin-1 mark against the program.
Values come from the linked datasheet. Always confirm against the datasheet for the exact part number and suffix you are placing, and check the first board.
What to watch on Filters & magnetics
- Nozzle too small for the weight
- Tall part placed at full speed and shifted
- Two-terminal vs four-terminal footprint mixed up
Read the full guide: Filters and magnetics: inductors, ferrites and chokes.
Program it on your machine
PnP Toolkit sets its words and setup sheet for your machine. Pick yours for the step-by-step:
Tools that use this part
FeatureParts libraryA built-in library of 179 packages and real part numbers, each with body and lead sizes, tape, MSL level and, for 104…FeatureMachine setup sheetYour shop’s answer to “which nozzle and which feeder for this package?” Each box offers your machine’s own feeder,…FeatureKitting list from the BOMPaste a BOM from Excel and get one line per reel: quantity to pull with spares, tape width, MSL level, package, and the…
More Filters & magnetics
Try PnP Toolkit free for 30 days
No credit card. Works on any phone or line PC. After the trial it’s $49/month per machine.