PnP TQFP-44 10×10 0.8
QFP · 10×10 body · 0.8 pitch · 44 pins
Package drawing
Top view, to scale, drawn by the same engine the app uses. Letters match the datasheet. In the app you can flip to the bottom view, which is how most datasheets draw it.
Numbers to program
| Body D | 10 mm |
|---|---|
| Body E | 10 mm |
| Height (A) | 1 – 1.2 (nom 1.1) mm |
| Pitch e | 0.8 mm |
| Leads / pins / balls | 44 |
| Lead width | 0.3 – 0.45 (nom 0.38) mm |
| Foot length | 0.45 – 0.75 (nom 0.6) mm |
| Overall span | 12 mm |
| Tape | 24 mm / 16 mm or tray |
Often shipped in JEDEC trays. Check coplanarity on bent leads.
Typical industry values for this package. Always confirm against the datasheet for the exact part number and suffix you are placing, and check the first board.
What to watch on QFP
- 0.5 mm and 0.4 mm pitch versions mixed up
- Bent leads from tray handling
- Tray orientation reversed
Read the full guide: QFP and LQFP packages.
Program it on your machine
PnP Toolkit sets its words and setup sheet for your machine. Pick yours for the step-by-step:
Tools that use this part
FeatureParts libraryA built-in library of 179 packages and real part numbers, each with body and lead sizes, tape, MSL level and, for 104…FeatureQFN decoderType the numbers from the package drawing exactly as printed, like “0.18 0.25 0.30”. The decoder picks the nominal,…FeatureMachine setup sheetYour shop’s answer to “which nozzle and which feeder for this package?” Each box offers your machine’s own feeder,…
More QFP
Try PnP Toolkit free for 30 days
No credit card. Works on any phone or line PC. After the trial it’s $49/month per machine.