PnP TSSOP-28
SOIC / TSSOP · 9.70 × 4.40 body · 0.65 pitch
Package drawing
Top view, to scale, drawn by the same engine the app uses. Letters match the datasheet. In the app you can flip to the bottom view, which is how most datasheets draw it.
Numbers to program
| Length L | 9.7 mm |
|---|---|
| Width W | 4.3 – 4.5 (nom 4.4) mm |
| Height (A) | 1 – 1.2 (nom 1.1) mm |
| Pitch e | 0.65 mm |
| Leads / pins / balls | 28 |
| Lead width | 0.19 – 0.3 (nom 0.24) mm |
| Foot length | 0.45 – 0.75 (nom 0.6) mm |
| Overall span | 6.4 mm |
| Tape | 16 mm wide / 8 mm pitch |
| Parts per reel (typical) | 2,500 |
Typical industry values for this package. Always confirm against the datasheet for the exact part number and suffix you are placing, and check the first board.
What to watch on SOIC / TSSOP
- Narrow SOIC programmed as wide
- Span typed in place of body width
- 50 mil pitch typed as 0.50 mm
Read the full guide: SOIC, TSSOP and MSOP gull-wing packages.
Program it on your machine
PnP Toolkit sets its words and setup sheet for your machine. Pick yours for the step-by-step:
Tools that use this part
FeatureParts libraryA built-in library of 179 packages and real part numbers, each with body and lead sizes, tape, MSL level and, for 104…FeatureUnit converters and size codesMillimeters, mils, inches and microns side by side; paste a min/nom/max row and get the nominal; a common pitch table;…FeatureKitting list from the BOMPaste a BOM from Excel and get one line per reel: quantity to pull with spares, tape width, MSL level, package, and the…
More SOIC / TSSOP
Try PnP Toolkit free for 30 days
No credit card. Works on any phone or line PC. After the trial it’s $49/month per machine.