PnP SOT-23-5
SC-74A · 2.90 × 1.60 body · 0.95 pitch
Package drawing
• Dashed feet: lead width or foot length not known, drawn at a typical size
Top view, to scale, drawn by the same engine the app uses. Letters match the datasheet. In the app you can flip to the bottom view, which is how most datasheets draw it.
Numbers to program
| Length L | 2.9 mm |
|---|---|
| Width W | 1.6 mm |
| Height (A) | 0.9 – 1.3 (nom 1.1) mm |
| Pitch e | 0.95 mm |
| Leads / pins / balls | 5 |
| Lead width | 0.4 mm |
| Overall span | 2.8 mm |
| Tape | 8 mm wide / 4 mm pitch |
| Parts per reel (typical) | 3,000 |
Body is 1.6 wide on most 5-pin parts.
Typical industry values for this package. Always confirm against the datasheet for the exact part number and suffix you are placing, and check the first board.
What to watch on SOT / Power
- SOT-23-5 and SOT-23-6 mixed up
- Tab pin assumed to be ground
- Lead spacing taken from the wrong variant
Read the full guide: SOT packages and small power packages.
Program it on your machine
PnP Toolkit sets its words and setup sheet for your machine. Pick yours for the step-by-step:
Tools that use this part
FeatureParts libraryA built-in library of 179 packages and real part numbers, each with body and lead sizes, tape, MSL level and, for 104…FeatureKitting list from the BOMPaste a BOM from Excel and get one line per reel: quantity to pull with spares, tape width, MSL level, package, and the…FeatureMachine setup sheetYour shop’s answer to “which nozzle and which feeder for this package?” Each box offers your machine’s own feeder,…
More SOT / Power
Try PnP Toolkit free for 30 days
No credit card. Works on any phone or line PC. After the trial it’s $49/month per machine.