PnP Alu electrolytic 8×10.2
SMD can · Ø8 × 10.2 mm can
Package drawing
Top view, to scale, drawn by the same engine the app uses. Letters match the datasheet. In the app you can flip to the bottom view, which is how most datasheets draw it.
Numbers to program
| Body D | 8 mm |
|---|---|
| Height (A) | 10.2 mm |
| Base | 8.3 mm |
| Tape | Embossed 12–24 mm, check label |
Polarized: the black mark on the can and the cut corners on the base are the − side. Tall part: check height and nozzle grip.
Typical industry values for this package. Always confirm against the datasheet for the exact part number and suffix you are placing, and check the first board.
What to watch on Tantalum / Alu / LED
- Tantalum installed backwards
- Case letter read as the wrong EIA size
- LED polarity mark read from the wrong drawing
Read the full guide: Tantalum, aluminum electrolytic and LED parts.
Program it on your machine
PnP Toolkit sets its words and setup sheet for your machine. Pick yours for the step-by-step:
Tools that use this part
FeatureParts libraryA built-in library of 179 packages and real part numbers, each with body and lead sizes, tape, MSL level and, for 104…FeatureScan and capturePhotograph a reel label, a DigiKey or Mouser page, a setup sheet or a dimension table. The app reads the text on the…FeatureJob setup checklistTen checks to tap through before every new job or changeover: program revision, board support, feeder list, imperial vs…
More Tantalum / Alu / LED
- Tantalum case A
- Tantalum case B
- Tantalum case C
- Tantalum case D
- Alu electrolytic 4×5.4
- Alu electrolytic 5×5.4
- Alu electrolytic 6.3×5.4
- Alu electrolytic 6.3×7.7
- All 13 →
Try PnP Toolkit free for 30 days
No credit card. Works on any phone or line PC. After the trial it’s $49/month per machine.