PnP MT41K256M16TW (DDR3L)
Micron DDR3L 4Gb x16 · 96-ball FBGA 8×14 · 8.00 × 14.00 · 0.8 pitch · 96 pins
Package drawing
Top view, to scale, drawn by the same engine the app uses. Letters match the datasheet. In the app you can flip to the bottom view, which is how most datasheets draw it.
Numbers to program
| Body D | 8 mm |
|---|---|
| Body E | 14 mm |
| Height (A) | 1.2 mm |
| Pitch e | 0.8 mm |
| Leads / pins / balls | 96 |
Body verified. Ball layout is the JEDEC x16 standard. Check ball size in the datasheet.
Values come from the linked datasheet. Always confirm against the datasheet for the exact part number and suffix you are placing, and check the first board.
What to watch on BGA / FBGA
- A1 corner rotated
- Bag left open: BGAs are often MSL 3 or higher
- Ball size taken from another package size
Read the full guide: BGA and FBGA packages.
Program it on your machine
PnP Toolkit sets its words and setup sheet for your machine. Pick yours for the step-by-step:
Tools that use this part
FeatureParts libraryA built-in library of 179 packages and real part numbers, each with body and lead sizes, tape, MSL level and, for 104…FeatureMSL floor-life timers and bake timesStart a timer when a moisture-sensitive bag is opened. Each bag counts down its floor life by MSL level and, when it…FeatureRotation helperWorks out the turn angle when pin 1 on the tape is not where the CAD data expects it, and adds it to the placement…
More BGA / FBGA
Try PnP Toolkit free for 30 days
No credit card. Works on any phone or line PC. After the trial it’s $49/month per machine.