PnP PTS810
C&K Tactile switch · 4.2 × 3.2 × 2.5 · 4.20 × 3.20 mm body
Package drawing
Top view, to scale, drawn by the same engine the app uses. Letters match the datasheet. In the app you can flip to the bottom view, which is how most datasheets draw it.
Numbers to program
| Length L | 4.2 mm |
|---|---|
| Width W | 3.2 mm |
| Height (A) | 2.4 – 2.7 (nom 2.55) mm |
| Leads / pins / balls | 4 |
| Tape | 12 mm |
Pick on the flat body, not the plunger. Pressing the actuator during pickup can damage it.
Values come from the linked datasheet. Always confirm against the datasheet for the exact part number and suffix you are placing, and check the first board.
What to watch on Connectors & switches
- Wrong pick point on a hollow body
- Pegs not matched to board holes
- Placed before shorter parts and knocked
Read the full guide: Connectors and switches.
Program it on your machine
PnP Toolkit sets its words and setup sheet for your machine. Pick yours for the step-by-step:
Tools that use this part
FeatureParts libraryA built-in library of 179 packages and real part numbers, each with body and lead sizes, tape, MSL level and, for 104…FeatureMachine setup sheetYour shop’s answer to “which nozzle and which feeder for this package?” Each box offers your machine’s own feeder,…FeatureKitting list from the BOMPaste a BOM from Excel and get one line per reel: quantity to pull with spares, tape width, MSL level, package, and the…
More Connectors & switches
Try PnP Toolkit free for 30 days
No credit card. Works on any phone or line PC. After the trial it’s $49/month per machine.