PnP USB4105-GF-A
GCT USB-C receptacle · SMT right-angle, 16 pin · 8.94 × 7.35 mm body
Package drawing
Top view, to scale, drawn by the same engine the app uses. Letters match the datasheet. In the app you can flip to the bottom view, which is how most datasheets draw it.
Numbers to program
| Length L | 8.94 mm |
|---|---|
| Width W | 7.35 mm |
| Height (A) | 3.31 mm |
| Leads / pins / balls | 16 |
Has through-hole shell pegs: check the board holes and placement force. Usually needs a gripper or a large flat pickup area; many shops place it by hand.
Values come from the linked datasheet. Always confirm against the datasheet for the exact part number and suffix you are placing, and check the first board.
What to watch on Connectors & switches
- Wrong pick point on a hollow body
- Pegs not matched to board holes
- Placed before shorter parts and knocked
Read the full guide: Connectors and switches.
Program it on your machine
PnP Toolkit sets its words and setup sheet for your machine. Pick yours for the step-by-step:
Tools that use this part
More Connectors & switches
No credit card. Works on any phone or line PC. After the trial it’s $49/month per machine.