PnP SY8089AAAC
Silergy 2.7-5.5V 2A sync buck · SOT-23-5 · 2.95 × 1.60 body · 0.95 pitch
Package drawing
Top view, to scale, drawn by the same engine the app uses. Letters match the datasheet. In the app you can flip to the bottom view, which is how most datasheets draw it.
Numbers to program
| Length L | 2.8 – 3.1 (nom 2.95) mm |
|---|---|
| Width W | 1.5 – 1.7 (nom 1.6) mm |
| Height (A) | 1 – 1.3 (nom 1.15) mm |
| Pitch e | 0.95 mm |
| Leads / pins / balls | 5 |
| Lead width | 0.3 – 0.5 (nom 0.4) mm |
| Foot length | 0.3 – 0.6 (nom 0.45) mm |
| Overall span | 2.7 – 3 (nom 2.85) mm |
| Tape | 8 mm / 4 mm, reel 3000 |
Values come from the linked datasheet. Always confirm against the datasheet for the exact part number and suffix you are placing, and check the first board.
What to watch on Power / DC-DC
- A HotRod part programmed as a plain QFN with a center pad
- Suffix mix-ups: R vs T reels of the same part
- Bags left open past floor life
Read the full guide: Power and DC-DC converter parts.
Program it on your machine
PnP Toolkit sets its words and setup sheet for your machine. Pick yours for the step-by-step:
Tools that use this part
FeatureParts libraryA built-in library of 179 packages and real part numbers, each with body and lead sizes, tape, MSL level and, for 104…FeatureQFN decoderType the numbers from the package drawing exactly as printed, like “0.18 0.25 0.30”. The decoder picks the nominal,…FeatureLoad checkScan or type each reel before it goes in a feeder. The answer is instant: on this job with its slot, close but not the…
More Power / DC-DC
- TPS62130RGTR
- LM1117 / AMS1117 -3.3
- TPS56C215RNNR
- TPS54302DDCR
- TPS563201DDCR
- TPS565208DDCR
- TPS62840DLCR
- TPS62133RGTR
- All 77 →
Try PnP Toolkit free for 30 days
No credit card. Works on any phone or line PC. After the trial it’s $49/month per machine.