PnP TPS54620RHLR
Texas Instruments 4.5-17V 6A sync buck · VQFN (RHL) 14 · 3.50 × 3.50 · 0.5 pitch · 14 pins
Package drawing
Top view, to scale, drawn by the same engine the app uses. Letters match the datasheet. In the app you can flip to the bottom view, which is how most datasheets draw it.
Numbers to program
| Body D | 3.35 – 3.65 (nom 3.5) mm |
|---|---|
| Body E | 3.35 – 3.65 (nom 3.5) mm |
| Height (A) | 1 mm |
| Pitch e | 0.5 mm |
| Leads / pins / balls | 14 |
| Lead width b | 0.18 – 0.3 (nom 0.24) mm |
| Exposed pad D2 | 1.95 – 2.15 (nom 2.05) mm |
| Exposed pad E2 | 1.95 – 2.15 (nom 2.05) mm |
| Tape | 12 mm / 8 mm, reel 3000 |
| MSL level | 2 |
14 pins + center pad 2.05 mm. 14 pins do not split evenly on 4 sides; check the drawing for pins per side. Drawing shows an estimated pins-per-side split; check the datasheet.
14 pins + center pad 2.05 mm. 14 pins do not split evenly on 4 sides; check the drawing for pins per side.
Values come from the linked datasheet. Always confirm against the datasheet for the exact part number and suffix you are placing, and check the first board.
What to watch on Power / DC-DC
- A HotRod part programmed as a plain QFN with a center pad
- Suffix mix-ups: R vs T reels of the same part
- Bags left open past floor life
Read the full guide: Power and DC-DC converter parts.
Program it on your machine
PnP Toolkit sets its words and setup sheet for your machine. Pick yours for the step-by-step:
Tools that use this part
More Power / DC-DC
- TPS62130RGTR
- LM1117 / AMS1117 -3.3
- TPS56C215RNNR
- TPS54302DDCR
- TPS563201DDCR
- TPS565208DDCR
- TPS62840DLCR
- TPS62133RGTR
- All 77 →
No credit card. Works on any phone or line PC. After the trial it’s $49/month per machine.