PnP TPS61088RHLR
Texas Instruments 2.7-12V 10A sync boost · VQFN (RHL) 20 · 4.50 × 3.50 · 0.5 pitch · 20 pins
Package drawing
Top view, to scale, drawn by the same engine the app uses. Letters match the datasheet. In the app you can flip to the bottom view, which is how most datasheets draw it.
Numbers to program
| Body D | 4.4 – 4.6 (nom 4.5) mm |
|---|---|
| Body E | 3.4 – 3.6 (nom 3.5) mm |
| Height (A) | 1 mm |
| Pitch e | 0.5 mm |
| Leads / pins / balls | 20 |
| Lead width b | 0.19 – 0.29 (nom 0.24) mm |
| Lead length L | 0.3 – 0.5 (nom 0.4) mm |
| Exposed pad D2 | 2.95 – 3.15 (nom 3.05) mm |
| Exposed pad E2 | 1.95 – 2.15 (nom 2.05) mm |
| Tape | 12 mm / 8 mm, reel 3000 |
Rectangular body. 20 pins + center pad 3.05 x 2.05 mm. Same code (RHL) as TPS54620 but a different size: always check pin count. Drawing shows an estimated pins-per-side split; check the datasheet.
Rectangular body. 20 pins + center pad 3.05 x 2.05 mm. Same code (RHL) as TPS54620 but a different size: always check pin count.
Values come from the linked datasheet. Always confirm against the datasheet for the exact part number and suffix you are placing, and check the first board.
What to watch on Power / DC-DC
- A HotRod part programmed as a plain QFN with a center pad
- Suffix mix-ups: R vs T reels of the same part
- Bags left open past floor life
Read the full guide: Power and DC-DC converter parts.
Program it on your machine
PnP Toolkit sets its words and setup sheet for your machine. Pick yours for the step-by-step:
Tools that use this part
More Power / DC-DC
- TPS62130RGTR
- LM1117 / AMS1117 -3.3
- TPS56C215RNNR
- TPS54302DDCR
- TPS563201DDCR
- TPS565208DDCR
- TPS62840DLCR
- TPS62133RGTR
- All 77 →
No credit card. Works on any phone or line PC. After the trial it’s $49/month per machine.