PnP ESP32-S3
Espressif Wi-Fi / BLE chip · QFN-56 7×7, 0.4 pitch · 7.00 × 7.00 · 0.4 pitch · 56 pins
Package drawing
• Dashed pads: b or L not entered, drawn at a typical size
Top view, to scale, drawn by the same engine the app uses. Letters match the datasheet. In the app you can flip to the bottom view, which is how most datasheets draw it.
Numbers to program
| Body D | 7 mm |
|---|---|
| Body E | 7 mm |
| Pitch e | 0.4 mm |
| Leads / pins / balls | 56 |
Body size verified. Lead and pad sizes not verified here — open the datasheet package drawing and use the QFN Decoder before programming.
Values come from the linked datasheet. Always confirm against the datasheet for the exact part number and suffix you are placing, and check the first board.
What to watch on Popular ICs
- Assuming a square center pad
- Wrong revision of the datasheet drawing
- Bag left open over a long weekend
Read the full guide: Popular ICs: microcontrollers, sensors and interfaces.
Program it on your machine
PnP Toolkit sets its words and setup sheet for your machine. Pick yours for the step-by-step:
Tools that use this part
More Popular ICs
No credit card. Works on any phone or line PC. After the trial it’s $49/month per machine.